ECE "TECHNOKOM" - the engineering and commercial enterprise focused on development and supply of equipment for the enterprises of the food industry

 

 

 

 

 

+7 (496) 575-32-72
ContactsCall back
Purpose - Flow receiving of milk from milk-trucks, with on-stream automatic control of received milk weight and real-time commercial accounting of milk received at preset flow rate
Control mode - Automatic
Capacity - 10, 20, 30 m3/h

Available models

"ММТ-10", "ММТ-20", "ММТ-30".

Purpose of function

Flow receiving of milk from milk-trucks, with on-stream automatic control of received milk weight and real-time commercial accounting of milk received at preset flow rate.

Operation mode

  • Automatic.

Key technological functions

  • Filtration of milk in order to clean it from mechanical impurities;
  • On-stream control of weight and temperature of the received milk;
  • Technological data registration and compilation of Operation register in real time;
  • Operation within range of preset capacity and production parameters;
  • On-stream taking of the milk batch average sample;
  • Operative visual control of key-parameters: volume, weight, density, temperature;
  • Cleaning of the plant with centralized CIP station.

Auxiliary functional features

  • Availability of Ethernet connection to PC;
  • Availability of the plant’s PLC integration to the High-Level Automatic Control System of the Milk Receiving Dept.

Control system functions

  • Automatic regulation of soft start, stop and production capacity of the plant;
  • Automatic recalculation of the received milk weight to the received milk volume;
  • Automatic control of valves functioning;
  • Technological data visualization and compilation of Operation register in real time;
  • Automatic control of CIP-cleaning;
  • Integration to the High-Level Automatic Control System.
The plant automatic control system is based on Siemens (Germany) PLC, FESTO (Germany) pneumatic devices; touch-screen operator’s panel on the control-board is provided for operation set-up by selection of the following mode of menu:
  • Manual control (adjustment);
  • Automatic control (production);
  • Pre-set parameters (service);
  • Alarms output;
  • Register output;
  • CIP-cleaning.

Technical characteristics

Model
“ММТ-10”
“ММТ-20
“ММТ-30”
Nominal capacity, L/h
10 000 20 000 30 000
Operational capacity range, L/h
8 000 - 15 000 15 000 - 25 000 25 000 - 32 000
Tolerance precision range, %
±0.03-0.05
±0.03-0.05
±0.03-0.05
Operational pressure MAX, MPa
0.4 0.4
0.4
Receiving tanks capacity, м3
2х1.0 2х1.0
2х1.0
Inlet/outlet DN, mm
50/50 65/65 80/80
Installed power, kWt
7.7 13.0 15.0

Construction features

Factory assembled SKID-plant consists of:
  • Stainless steel mesh-wire filters for cleaning milk of mechanical impurities – 2 pcs.;
  • Self-priming centrifugal pump – 1 pcs.;
  • Centrifugal feeding pump – 1pcs.;
  • Milk tanks – 2 pcs.;
  • Weight control platforms on strain-gauge transducers – 2 pcs.;
  • Sampling device – 1 pcs.;
  • Controlling sensors (temperature, flow, margin level) – 1 set;
  • Internal pipelines and valves with pneumatic acuators – 1 set;
  • SKID – 1 set;
  • Flexible hose for connection to milk-trucks – 1 set;
  • Switch cabinet with control panel.

Required operational conditions

Milk receiving plant “Standart-M” should be installed in-doors, in heated production departments, with normal ambient temperature and humidity.
“Standart-M” switch-cabinet ingress protection rating is IP54 (spray-proof design).

“Standart-M” series milk receiving plant are certified with Declaration of correspondence to requirements of the Technical Regulations of the Customs Union (TRCU).

Additional information

For more details on modernization and technical upgrading of Milk receiving Departments at dairy plants carried out by ECE “TECHNOKOM” please check page “Media release”.
IF YOU HAVE QUESTIONS, SET THEM TO US!
Submit
In case of information citing from a site, the reference to the source is obligatory. All rights reserved © Technokom Ltd, 2014-2023